Search Results

The author states that the objects of the paper are to define and trace the development of the various processes of carburetion, and to offer such suggestions along these lines as may assist the investigator in developing motorboats, automobiles and self-contained unit motor cars for railway purposes. The surface carburetor is mentioned chiefly as of historic interest. In considering the jet carbureter the author discusses the proportion of gas desired, the effect of the varying inertia of the air and the liquid gasoline and the breaking up of the combustible needed. Following sections review the devices for using kerosene, such as gasoline jet carbureters to which heat is applied, devices of the fixed gas type, the introduction of combustible directly into the cylinder, forcing combustible directly upon a hot surface in the cylinder and devices which raise the combustible to the boiling point.

The author first mentions hot-tube ignition, which preceded the spark-plug, then the low-tension type of make-and-break ignition, following with the development of spark-plugs. He compares the conical and petticoat types of porcelain and discusses at some length the insulating materials used in spark-plugs, such as porcelain, mica, steatite, glass and quartz. In this connection he covers the composition of the material, its dielectric strength, carbon-absorbing ability, heat-conductivity, mechanical characteristics, and the difficulties of glazing. Under the heading of general design of spark-plugs the author takes up such points as assembly of insulator and center electrode, electrodes, gaskets, and separable and integral plugs.

The author states that the purpose of the paper is to outline that phase of metallurgical work pertaining to the connection between the laboratory and production in the automotive industry. Reasons are cited for selecting certain designs for parts to facilitate machining, complete or partial case-hardening, finishing and assembling. The next step is the choice of materials, a subject which is treated at some length. The author then takes up in turn the field for standardization in steel specifications, inspection of materials, physical testing of steels, uniformity of composition of metals, heat-treating operations, methods of carburizing, depths of case-hardening, treatment after carburization, errors in overspeeding hardening operations and drawing heat-treatment at low temperatures. Types of pyrometers, operations on hardened work, inspection for hardness and selection of hardening equipment are some of the other topics discussed.

This paper first traces the early development of aviation engines in various countries. The six-cylinder Mercedes, V-type twelve-cylinder Renault, and six-cylinder Benz engines are then described in detail and illustrated. Various types of Sunbeam, Curtiss, and Austro-Daimler are also described. The effect of offset crankshafts, as employed on the Benz and Austro-Daimler engines, is illustrated by pressure and inertia diagrams and by textual description. The paper concludes with a section on the requirements as to size of aviation engines, four curves showing the changing conditions which affect the engine size requirements. These curves relate to variations of temperature, air density, engine speed, airplane speed and compression ratio required to compensate for decrease in air density, all as related to varying altitude.

Inasmuch as horses cannot meet the demand for increased farm power, the tractor must come at once. So far the supply of tractors has been entirely inadequate to meet the demand. The author specifiies some of the problems that confront designers of farm tractors. To make the tractor immediately available for farm work, it must be adaptable to practically all of the existing types of horse-drawn implements, besides furnishing belt power for a wide variety of present power-driven farm machinery. In designing tractors it must be remembered that the horse is a very flexible unit, capable of a wide variation in power output. Designing a tractor to furnish the necessary power for the majority of farm conditions, requires an intimate knowledge of crops, soils and farm management. These must be analyzed carefully so as to make the machine have as wide a range of usefulness as possible.

The question as to whether a part should be made or bought is one that must be settled by the individual maker according to the value of his product, the nature of the part, his capital available for manufacturing purposes and the price at which his product is sold. The author describes the practice followed by some of the large companies, showing that in spite of their being quantity producers, they have found it desirable to buy a number of important parts. Certain parts are rarely made by automobile manufacturers, either because they can be bought more cheaply or because the machinery to produce them is intricate. The author sums up the problem by stating that a manufacturer makes the unit on account of not getting deliveries or because he does not get a fair price from the parts maker or an article good enough to satisfy his conditions. In order to give individuality to the product, the car maker often produces certain parts, such as the engine, himself.

The author limits his consideration of rear axles to that of the bevel-gear type and takes up the subject under the heads of load-carrying member, gearing, driving-shaft, brakes and materials. Several different forms of cast and pressed axle housings are briefly described. Mention is then made of the axle gearing and data given showing the end thrust for straight-tooth bevel pinions. The methods of supporting pinions and of attaching bevel gears to the differential are discussed. Forms of differentials are considered, several different conventional types being illustrated. The subject of driving shafts is briefly reviewed, as is also that of brakes and brake materials. The author concludes his paper by figures showing the tensile strength, elastic limit and elongation of the metals used in the various parts of the rear axle and also explains some oil-retaining and dust-protecting features of design.

The author considers the effects of velocity variation on the operation of a car and states that this variation is absorbed mainly by the flywheel. A formula is given for calculating the pressure on universal bearings. Various methods of protecting and lubricating joints are described. A number of European types of joints are illustrated. A much larger number of types of joints are used abroad in-asmuch as each maker usually makes his own design instead of purchasing it from a specialist as is the usual practice in this country. In conclusion the paper describes types of joints using flexible material, such as leather or spring steel.

The authors point out the need for more concrete data concerning the physical properties of bronze alloys and present an extensive chart covering the results of actual tests on a large range of cast bronze alloys. The influence of the method of making the test-specimen is discussed and it is hinted that new evidence concerning the proper interpreting of the true proportional limit is available. A very extensive set of microphotographs illustrates the variety of structures existing in the ordinary and in some unusual bronze alloys.

In this paper the author gives the results of an investigation of coarse crystallization. This investigation was carried out with commercial materials such as cold-drawn wire, hot and cold-rolled sheet, strip steel, cold-drawn tube and cold-pressings. The results of other investigations are briefly outlined. Coarse crystallization, or grain-growth, it is stated, is due to the action of a limited amount of strain, exceeding the elastic limit, followed by annealing within certain temperature ranges. The experimental work which led to this conclusion is explained in detail in the paper. The effect of forging, cold-drawing, cold-rolling and cold-pressing was determined with commercial materials. Some study was made of the effect of carbon on grain-growth and of the effect of coarse crystallization on the physical properties. In the discussion of commercial materials special reference is made to those used in motor car construction.

The authors first define the elementary conditions governing combustion efficiency, dividing these conditions into three main classes. They next compare engines operating on constant volume, constant temperature and constant pressure cycles, dealing specifically with the Otto, Diesel and semi-Diesel types. The main part of the paper is devoted to an outline of the constant pressure cycle, analyzing its advantages as compared with the merits of the constant volume cycle now used in internal-combustion engines. The paper is concluded with a detail description of a proposed constant pressure engine.